Excellant - someone read the rules! A nice touch is to deburr the hole and some people will touch a dab of paint on the exposed mat'l. Keep in mind that the inspector will be needing to have room to get dial calipers straight into the hole.
One hole per pipe - for example the roll bar main hoop will need one hole, if you have a full cage then put another hole into the front area towards the floor. If you have supports then place a hole into a least one on one side.
One hole per pipe - for example the roll bar main hoop will need one hole, if you have a full cage then put another hole into the front area towards the floor. If you have supports then place a hole into a least one on one side.
Comment