1997 Tall man chassis Formula Mazda
A race ready car. Needs nothing but a new home. We have recently done several
things to it.
All new brake pads and rotors 1 race ago
New muffler with bolt kits and bracket installed 1 race ago
New style mirrors just installed
New front bearings just installed 0 races on them
Had tranny blueprinted with the shift finger upgrade
Drummond rebuilt motor 9 races ago
Taylor did tranny and upgrade 1 race ago new clutch as well
Current annual
PI dash with software CD download cables manuals w/beacon and stand
Aluminum calipers
Transponder
Single adj. Koni shocks
Two complete sets of wheels one slicks, one rains
Short and Tall gear sets and a new complete stud and nut kit for tranny
Aluminum engine pan
Alignment bars
Quick jack
Folding Jackstands
Clutch alignment tool
SPARES INCLUDE BUT ARE NOT LIMITED TO.
Brand new set of bleed screws
4 shock packers
Exhaust gasket and nut kit
1 nose, and 1 each side pods for either side
Tranny draw bolt, several dog rings
8 main carb jets, 6 idle jets
2 nose pole collars
2 valve stems
2 ign. coils, spark plug set, wire set, distributor cap and rotor
4 brake rotor hats, several useable rotors, and the steel calipers
Various heims and Dzus fasteners
Front stub axle, Front wing outer skins, And 4 end fences
Intermediate water cooling pipe
3 one piece cone/nut assemblies
2 exhaust tips
I have tons of photos on and off track so can send anything in particular you wish to see.
I am getting out so I have several package type deals that someone could go with from
Everything you need to go racing, to just the car and prices are as listed:
Just the car: $18,500.00
Car with spares: $20,500.00
Car, Spares, and 20’ enclosed trailer (Pace) with air and setup for 110v has winch and
Racing ramps: $24,000.00
All the above plus all my racing related stuff, Brand new 2010 Bell Helment, Hans device
Set of electronic scales, tire marker, caster/camber gauge, gas cans EVERYTHING!
Price: $25,000.00
Call: 205-365-6059 or email: johnnewcomb62 at yahoo dot com
A race ready car. Needs nothing but a new home. We have recently done several
things to it.
All new brake pads and rotors 1 race ago
New muffler with bolt kits and bracket installed 1 race ago
New style mirrors just installed
New front bearings just installed 0 races on them
Had tranny blueprinted with the shift finger upgrade
Drummond rebuilt motor 9 races ago
Taylor did tranny and upgrade 1 race ago new clutch as well
Current annual
PI dash with software CD download cables manuals w/beacon and stand
Aluminum calipers
Transponder
Single adj. Koni shocks
Two complete sets of wheels one slicks, one rains
Short and Tall gear sets and a new complete stud and nut kit for tranny
Aluminum engine pan
Alignment bars
Quick jack
Folding Jackstands
Clutch alignment tool
SPARES INCLUDE BUT ARE NOT LIMITED TO.
Brand new set of bleed screws
4 shock packers
Exhaust gasket and nut kit
1 nose, and 1 each side pods for either side
Tranny draw bolt, several dog rings
8 main carb jets, 6 idle jets
2 nose pole collars
2 valve stems
2 ign. coils, spark plug set, wire set, distributor cap and rotor
4 brake rotor hats, several useable rotors, and the steel calipers
Various heims and Dzus fasteners
Front stub axle, Front wing outer skins, And 4 end fences
Intermediate water cooling pipe
3 one piece cone/nut assemblies
2 exhaust tips
I have tons of photos on and off track so can send anything in particular you wish to see.
I am getting out so I have several package type deals that someone could go with from
Everything you need to go racing, to just the car and prices are as listed:
Just the car: $18,500.00
Car with spares: $20,500.00
Car, Spares, and 20’ enclosed trailer (Pace) with air and setup for 110v has winch and
Racing ramps: $24,000.00
All the above plus all my racing related stuff, Brand new 2010 Bell Helment, Hans device
Set of electronic scales, tire marker, caster/camber gauge, gas cans EVERYTHING!
Price: $25,000.00
Call: 205-365-6059 or email: johnnewcomb62 at yahoo dot com
Comment