2014 - Limited Test'n'Tune Results

[e30Racer]

Ok, I think I got the results to work but they aren't linked to Axware online. They are just attachments to this thread.

[jledford]

Such a tease.... I want to know exactly how many cones I made Sara run after!

[rlcsolo2]

All I can say is thank you and I'm sorry for all (mainly 1) of the slalom cones I repeatedly murdered. I'm sure that cone was destroyed by the end of the day Sunday. Thanks to all of the workers that ran so much on Sunday.

[Vfastcaddy]

it looks like you are using the 2013 pax. so, you have 2013 b stock number for b street, etc

edit: oh, I see that you just used last years classes too. no problem.

[lcr56]

Thanks to all the workers for all the cone running you did Sunday. I hit a fair share of them.


2014 PAX Calculator http://www.site-watcher.com/tools/PaxCalc.aspx

[jledford]

Lots of cones from me, thanks to the workers!

My 25.518 on the afternoon course was a clean run so I'm happy!

[e30Racer]

We will have the proper classes and PAX for Points #1

[claym]

I guess results have all three courses clumped together?

Thanks to all for good weather, good workers, good friends and good times!

[jledford]

Yep, looking at my times those are from all three courses.

[e30Racer]

There's no way to split the results up that I know of. You are more than welcome to learn the timing software so you can have the results being shown however you'd like.

[kilgojr]

We actually already have all the classes and pax factors set up for this year, as you will notice from Saturday Test n Tune. Unfortunately, with the difficulties that occured in timing on Sunday, a new file had to be pulled over and the 2014 set up was not pulled with it.
This will all be fixed by points 1. As we always say, these events are as much Test n Tune for the drivers as it is for the workers.

[engled]

As we always say, these events are as much Test n Tune for the drivers as it is for the workers.

+juan

[aufoxy]

Hahaha most of my times are under Clay's... Guess we forgot to switch numbers. Oh well hahah

[aufoxy]

There's no way to split the results up that I know of. You are more than welcome to learn the timing software so you can have the results being shown however you'd like.

As far as I know, in order to do this, you would have had to create a separate event for the second half of the day in order to have the times separated from each other. Not sure if there's a way to do it after the event is over.

[nicktcr]

Hahaha most of my times are under Clay's... Guess we forgot to switch numbers. Oh well hahah

Yeah, I was trying to notice who's helmet was bouncing around in the driver's seat, since the car always came up to the line with just "94", but as you know, the trailer can be a hectic place

As far as I know, in order to do this, you would have had to create a separate event for the second half of the day in order to have the times separated from each other. Not sure if there's a way to do it after the event is over.

You'd be correct there. Each course would have to be a separate "event" in axware. I do not think you can do it after the event, at least not without a huge pain that is not worth the trouble for a TnT.