WORKER THREAD Private Test 'n Tune Feb 21st

[cdambrose]

We need 12 workers for the Private Test'n'Tune on Sunday, Feb 21st. You will be working all day, but you will be compensated and we will provide lunch for you. I know its not a lot of fun working while everyone else is driving, but this event benefits the club and we have a good time.

If you're interested and available, please respond to this thread so we can start getting a worker count.

#1 Event Chair: Josh Bassett and Charles D'Ambrose
#2 Course Designer: Clay M,
#3 Set Up (x3): Hope to re-use Open TnT Course
Timing and scoring (2 workers):
Truck and Trailer driver(s) Sunday Feb 21st (worker assignment for the day):
#1
#2
Registration 7:30a
Pre-Registrar/Check-in:
Onsite-Registrar:
Cashier:
Devotions :
Waiver station / 7:00a to 8:30 am (worker assignment for the day)
#1 Roger Sailors
Waiver Station / 8:15am to drivers meeting (worker assignment for the day)
#2

Tech Inspection / 7:30a
(if you have not worked Tech before you must first talk with Heath, Charley or Josh)
#1 Tanner
#2 Chris Asmus

Safety Steward / 7:30a We need 2 minimum (make sure you get your shadows in)
#1
#2
shadowing :
shadowing :

[ej1pat]

work

I can work it, just put me were you need me.

[fwman1]

I'm participating, but would be happy to work early waivers to help out.

[claym]

I'll be there to help with course setup both days

[thatgermanguy]

I can work tech. Still unsure if I will be able to drive. If I cant find a car to drive I will work an additional assignment if needed

[HPEVOX]

I will not be at this event

[jbass1911]

Just wanted to bump this thread as it appears we are short on workers. I also wanted to point out that while we do need the early worker positions, it will not be the assignment for the day. Everyone will get a chance to shag cones and run timing. This would be a good opportunity for someone to learn about the timing system and race control. We will however need a full time safety steward.

[YoursTruly]

I can arrive early to help Clay tweak/fix if necessary. I can also do tech with Chris.

[c-evoVIII]

We will be there, place us where you need us. C/ Sara

[cdambrose]

I can work it, just put me were you need me.

Pat, would you like to learn Timing and Scoring?

[JohnW8]

I will not be at this event. Sorry guys, I already had other plans.

[mpcavana]

I want to thank AL SCCA for providing the event today. Charles and Josh are great hosts and kudos to all the workers.

Today I learned that I miss my 350Z (thanks Sam), how to get more info out of SoloStorm and that I like the ND MX-5 on Bridgestones (Thanks Mike) but that it needs adjustable shocks to control body roll.

Great day!

[fwman1]

I'd like to second Mike's comments. That was my first time at the Met and I liked it very much. The day started with drizzle and a wet course, but ended up being a great day for getting in lots of runs. I got to ride with a couple of the fast movers and it was so impressive to see how they get it done. Lyle and Nathan specifically. Super nice guys and super fast! Thanks to the workers who made it possible. Hope the ND was ok...