Tweet
This is the worker thread for the Open Test 'n Tune event that will be held on Saturday, Feb 20th at the Hoover Met.
As always, we need people to show up early and help us clean up and set up.
Event is at the Hoover Met: Map to 10 Ben Chapman Drive, Hoover, AL 35244
Gates open at 7:00, tech closes at 9:00, on-site registration/check-in lasts until 9:15, and first car off at 10:00.
If there are any questions, please let me or Josh know.
Early Set Up / 6:30a
#1 Event Chair: Josh Bassett and Charles D'Ambrose
#2 Course Designer: Clay, Yoder
#3 Set Up (x3): Tanner
Timing and scoring (2 workers): Rod H,
Truck and Trailer driver(s) Friday Feb 19th (worker assignment for the day):
#1 Delanie
#2
Registration 7:30a
Pre-Registrar/Check-in:
Onsite-Registrar:
Cashier:
Devotions : Jeremiah
Waiver station / 7:00a to 8:30 am (worker assignment for the day)
#1 Mike Wenning
Waiver Station / 8:15am to drivers meeting (worker assignment for the day)
#2
Tech Inspection / 7:30a
(if you have not worked Tech before you must first talk with Heath, Charley or Josh)
#1 Chris Asmus
#2 Jerry Leadfoot
Safety Steward / 7:30a We need 2 minimum (make sure you get your shadows in)
#1 John W8
#2 Sam
shadowing :
shadowing :
Novice Directors / 8:30a
#1 C $
#2 Sara
Sweeper/Blower:
PS: ALSCCA Members will get first preference for all setup or specialty worker assignments.
As always, we need people to show up early and help us clean up and set up.
Event is at the Hoover Met: Map to 10 Ben Chapman Drive, Hoover, AL 35244
Gates open at 7:00, tech closes at 9:00, on-site registration/check-in lasts until 9:15, and first car off at 10:00.
If there are any questions, please let me or Josh know.
Early Set Up / 6:30a
#1 Event Chair: Josh Bassett and Charles D'Ambrose
#2 Course Designer: Clay, Yoder
#3 Set Up (x3): Tanner
Timing and scoring (2 workers): Rod H,
Truck and Trailer driver(s) Friday Feb 19th (worker assignment for the day):
#1 Delanie
#2
Registration 7:30a
Pre-Registrar/Check-in:
Onsite-Registrar:
Cashier:
Devotions : Jeremiah
Waiver station / 7:00a to 8:30 am (worker assignment for the day)
#1 Mike Wenning
Waiver Station / 8:15am to drivers meeting (worker assignment for the day)
#2
Tech Inspection / 7:30a
(if you have not worked Tech before you must first talk with Heath, Charley or Josh)
#1 Chris Asmus
#2 Jerry Leadfoot
Safety Steward / 7:30a We need 2 minimum (make sure you get your shadows in)
#1 John W8
#2 Sam
shadowing :
shadowing :
Novice Directors / 8:30a
#1 C $
#2 Sara
Sweeper/Blower:
PS: ALSCCA Members will get first preference for all setup or specialty worker assignments.
Comment